(1.Beijing Institute of Technology, School of Aerospace engineering, Beijing, 100081;2.Beijing Institute of Technology, Beijing, 100081;3.Beijing Institute of Technology, Beijing, 100081)

Abstract：DSP is widely used in Engineering，while bootloaderis even a key technology. This research takes TM320C6727 produced by TI andS29GL512N flashproduced by Samsung Corporationas an example to introduce the TM320C672x DSP bootloading process.This paper put forward a kind of realization to burn the flash with DSP programming software ccs3.3.The experiment proves that the research method is reasonable，reliable and realized easily .This research also has generality and feasibility for the TMS320C672x DSP.
Key words：DSP；FLASH；BOOTLOADER

                                                 REFERANCE
[1]LUO Xiaoli, XIE Nan and ZHANG Bo. “The Method for Bootloading of TMS320C6713’s Outer Flash.”Nuclear Electronics & Detection Technology, vol.30.No.6,2010,pp.748-749.
[2]WANG Hongyi and WANG Wei.“Boot Investigation of TMS320C6000 Series DSPs.”Journal of Modern electronic technology, vol.23, 2003, pp.34-35.
[3]YUAN Zhibin, WU Guoan, TANG Yuyu and CHEN Tao. “Design of Bootloader Based on an Embedded System of DSP.”Journal of Electronic Engineer, vol.34.No.8,2008,pp.47-48.
[4]SONG Huajun,ZHU Ming and LIU Wei. “TMS320C64x Flash Design and Bootloader Complete.”Journal of measurement and control technology, vol. 20.No. 23,2004,pp.281-282.
[5]WANG Fengchen, QIAO Weimin and LI Qingrui. “Design of TI TMS320C6713 board Flash second level bootload program.”Journal of Microcomputer information, vol.22.No.11,2006,pp.157-158.
[6]Duan Rongxing and Zheng Guolan. “TMS320C6711 Flash bootloader system research and design” Microcomputer Applications, vol.20,No.11,2004,pp.18-19.