(國核自儀系統工程有限公司,研發中心)
摘 要:本文通過對分布式控制系統(DCS)I/O數據通訊模型和QNET協議的研究,介紹了QNET協議通訊的特點和實現方法,并提出了一種基于QNET的DCS I/O數據網絡通訊模型,可在工業DCS系統中加以應用,大大提高DCS系統I/O數據網絡通訊的能力。
關鍵詞:QNX; QNET; 控制系統; 數據通訊; DCS;
Research of DCS I/O Data Communication Model Based on QNET
Huang Jiayu
(State Nuclear Power Automation System Engineering Company, R&D center)
Abstract: The I/O data communication model of distributed control system(DCS) was researched in this paper, and so was the QNET protocol. It introduced the features of QNET communication and the way of realization. A DCS I/O data communication model was designed, and can be used in the industrial DCS, thus improving the ability of I/O data communication.
Key words: QNX; QNET; Control System; Data Communication; DCS;
參考文獻:
殷代宗, 苗克堅. 基于QNX實時系統的網絡傳輸性能測試[J]. 測控技術, 2007,26(4):61-63 段曹蒲, 傅鵬. Qnet協議在EAST極向場電源操作監控系統中的應用[J]. 微計算機信息, 2006,22(10-1):24-26
蔣敏, 單家芳, 孔軍. 基于Socket的多平臺通訊研究[J]. 計算機工程與應用, 2005,36:135-137
張筱磊, 趙培慶. 基于Qnet的實時數據通信[J]. 電子產品世界, 2005,11:92-93
王二西, 邊信黔, 常宗虎. QNX環境下多線程數據采集[J]. 工業控制計算機, 2004,17(8):22-23
第一作者簡介:
黃佳鈺(1984 - ):國核自儀系統工程有限公司研發中心,碩士,助理工程師,現從事核電站儀控系統研制!